LocoFi'ed Walthers Proto HO Scale Canadian Pacific #5497 EMD SD45 Diesel Locomotive equipped with LocoFi 3 (DULLHB).
 
By 1964, six-axle diesels were rapidly evolving from low speed luggers to fast freight engines. EMD continuously updated its Special Duty (SD) series with new models, and celebrated New Years Day 1966 by unveiling six locos powered by variations of its new 645 prime mover. At the top was the SD45, with an enormous 20-cylinder power plant cranking out 3600 horsepower. Timing couldn't have been better as American railroads experienced a surge in traffic and were ready to modernize their fleets. The SD45 proved popular for all types of assignments, and 1,260 were built through late 1971, when it was replaced by the SD45-2. Retirements began in earnest in the 1980s, but many were rebuilt and eventually sold to regional railroads. As of 2011, a few are still in use, and several are preserved in museums.
 
Features Include:
Limited edition - one time run of these roadnumbers!
Prototypes in road freight service from 1966 to early 2000s
14:1 helical gears for ultra-quiet and smooth running
Easy multiple unit operation
Superb paint and lettering
Metal grab irons and lift rings
LED constant and directional headlights
Powerful five-pole, skew-wound, high-torque, high-efficiency can motor
Proto MAX(TM) metal knuckle couplers
NEW - Operating front pilot-mounted ditch lights
Plated over cab-mounted headlight
Nose-mounted headlight
Front pilot-mounted plow
Long blower-duct sill
Large Sinclair radio antenna
Modern-style coupler cut levers
Nathan K3 air horn on stand
Dynamic brake vent
Rear wheel-type hand brake
Late Flexicoil trucks with 2 high outside mounted brake cylinders
 
Here's the link to the original product: https://www.walthers.com/emd-sd45-standard-dc-canadian-pacific-5497-1995-red-dual-flag-logo
 
LocoFi'ed Series introduces the most popular and well-known locomotives and trains to modelers, now equipped with LocoFi™ modules to enable it to run on DC, DCC or deadrail layouts, with no additional wiring or equipment installation required. All you need is an Android / Amazon Fire device - cellphone or tablet (no Internet required) with LocoFi™ app installed, available for FREE on Google Playstore / Amazon Appstore. If you are new to LocoFi™, and would like to see if it is for you, then LocoFi'ed Series offers the perfect chance to try it out.
 
This is a one time opportunity to own a customized LocoFi'ed Walthers Proto HO Scale Canadian Pacific #5497 EMD SD45 Diesel Locomotive equipped with LocoFi 3 (DULLHB). Pre-installed LocoFi'ed Series are rare and limited in number, hand soldered with care and attention to detail, with highest level of craftsmanship and technique, in the USA.
 
The LocoFi module is pre-installed. Simply install the app, connect and run!
 
Please reach out if you have any questions.
 
Technical Specifications
Input Power Type: Clean (NOT pulsed) DC, DCC or battery - Yes, an old laptop adapter laying around is ideal
Input Voltage: 7V - 24V - Wide input voltage range
Current Rating: 1.5A (1A motor) - High amperage decoder
Motor Operating Voltage: Same as input voltage
WiFi Spectrum: b/g/n (2.4 GHz)
Smart Devices Supported: Android
Speaker with custom tuned enclosure included
Sound Scheme: Diesel; 8-bit 16kHz; .WAV; 3 channel polyphonic; stored on pluggable microSD to easily load custom sounds
Supported Sounds: Engine Startup, Idle, Shutdown, Horn and Bell
Lights: Front and Rear, LEDs, On / Off, 10mA max on each output; resistors onboard
Other: Onboard capacitor for typical dirty track issues
Supported OS: Android 5.0+, Fire 5+