LocoFi'ed Atlas Master Silver HO 10004001 CSX GP40 #6604 Diesel Locomotive equipped with LocoFi 3 (DULLHB).
 
In 1966 EMD introduced a new line of locomotives based on the 16-cylinder 645-series prime mover. The ‘40-series’ included a six-axle and four-axle model, the latter being the GP40. A total of 1,145 units were produced between 1966 and 1972. These turbocharged 3,000hp locomotives were used primarily in road freight service. The GP40 was a versatile locomotive that could be found across the US hauling drag freights over mountain passes and leading high-speed intermodal trains across flat terrain. Three rooftop radiator fans at the rear of the long hood differentiate a GP40 from its lower horsepower counterpart, the GP38, which has two fans at this location.
 
Features:
Golden-white LEDs
Realistic die-cast underframe
Five-pole skewed armature motor with dual flywheels for optimum performance at all speeds
Directional lighting
Factory-equipped with AccuMate knuckle couplers
Detailed cab interior with crew
Separately installed scale windshield wipers, metal grab irons and fine scale handrails
Movable drop steps
Walkway safety tread
Coupler cut bars
Multiple unit hoses and trainline hoses
Snowplow
 
Additional feature parts included but not installed - GP-40:
Electrical cabinet air filter box - ECAFB
Two engine compartment roof vents which were added by many railroads sometime after delivery
 
LocoFi'ed Series introduces the most popular and well-known locomotives and trains to modelers, now equipped with LocoFi™ modules to enable it to run on DC, DCC or deadrail layouts, with no additional wiring or equipment installation required. All you need is an Android / Amazon Fire device - cellphone or tablet (no Internet required) with LocoFi™ app installed, available for FREE on Google Playstore / Amazon Appstore. If you are new to LocoFi™, and would like to see if it is for you, then LocoFi'ed Series offers the perfect chance to try it out.
 
This is a one time opportunity to own a customized Atlas Master Silver HO 10004001 CSX GP40 #6604 Diesel Locomotive locomotive equipped with LocoFi 3 (DULLHB). Pre-installed LocoFi'ed Series are rare and limited in number, hand soldered with care and attention to detail, with highest level of craftsmanship and technique, in the USA.
 
The LocoFi module is pre-installed. Simply install the app, connect and run!
 
Please reach out if you have any questions.
 
Technical Specifications
Input Power Type: Clean (NOT pulsed) DC, DCC or battery - Yes, an old laptop adapter laying around is ideal
Input Voltage: 7V - 24V - Wide input voltage range
Current Rating: 1.5A (1A motor) - High amperage decoder
Motor Operating Voltage: Same as input voltage
WiFi Spectrum: b/g/n (2.4 GHz)
Smart Devices Supported: Android
Speaker with custom tuned enclosure included
Sound Scheme: Diesel; 8-bit 16kHz; .WAV; 3 channel polyphonic; stored on pluggable microSD to easily load custom sounds
Supported Sounds: Engine Startup, Idle, Shutdown, Horn and Bell
Lights: Front and Rear, LEDs, On / Off, 10mA max on each output; resistors onboard
Other: Onboard capacitor for typical dirty track issues
Supported OS: Android 5.0+, Fire 5+