LocoFi'ed Atlas Master Silver Series HO 10003901 Chessie System GE U30C Phase I #3301 Diesel Locomotive equipped with LocoFi 3 (DULLHB).
 
The General Electric U30C locomotive was put into production in 1966, replacing the similar looking U28C. Offering 200 more horsepower than its predecessor, the U30C allowed GE to compete with the EMD’s SD40 in the horsepower race. The U30C proved to be very popular, selling 600 units during its 10 year production span, making it the best selling Universal Series GE locomotive.
This new model from Atlas represents a Phase 1 U30C. The primary spotting feature is constant width long hood (later phase models featured a wider radiator section), as well as various radiator intake arrangements. Note that Atlas also offers the later Phase 2 and Phase 3 models, so the Phase 1 allows you to select the most accurate U30C for your favorite railroad.
 
Features:
All new tooling.
Etched metal grilles.
Several cab, headlight and nose light variations to accurately match the prototype.
Newly tooled Adirondack truck sideframes.
Separately applied details parts.
New! Factory equipped with metal knuckle couplers.
 
 
LocoFi'ed Series introduces the most popular and well-known locomotives and trains to modelers, now equipped with LocoFi™ modules to enable it to run on DC, DCC or deadrail layouts, with no additional wiring or equipment installation required. All you need is an Android / Amazon Fire device - cellphone or tablet (no Internet required) with LocoFi™ app installed, available for FREE on Google Playstore / Amazon Appstore. If you are new to LocoFi™, and would like to see if it is for you, then LocoFi'ed Series offers the perfect chance to try it out.
 
This is a one time opportunity to own a customized LocoFi'ed Atlas Master Silver Series HO 10003901 Chessie System GE U30C Phase I #3301 Diesel Locomotive equipped with LocoFi 3 (DULLHB). Pre-installed LocoFi'ed Series are rare and limited in number, hand soldered with care and attention to detail, with highest level of craftsmanship and technique, in the USA.
 
The LocoFi module is pre-installed. Simply install the app, connect and run!
 
Please reach out if you have any questions.
 
Technical Specifications
Input Power Type: Clean (NOT pulsed) DC, DCC or battery - Yes, an old laptop adapter laying around is ideal
Input Voltage: 7V - 24V - Wide input voltage range
Current Rating: 1.5A (1A motor) - High amperage decoder
Motor Operating Voltage: Same as input voltage
WiFi Spectrum: b/g/n (2.4 GHz)
Smart Devices Supported: Android
Speaker with custom tuned enclosure included
Sound Scheme: Diesel; 8-bit 16kHz; .WAV; 3 channel polyphonic; stored on pluggable microSD to easily load custom sounds
Supported Sounds: Engine Startup, Idle, Shutdown, Horn and Bell
Lights: Front and Rear, LEDs, On / Off, 10mA max on each output; resistors onboard
Other: Onboard capacitor for typical dirty track issues
Supported OS: Android 5.0+, Fire 5+