LocoFi'ed Atlas Classic Silver HO 10002997 Santa Fe #2395 Alco RS1 Diesel Locomotive equipped with LocoFi 3 (DULLHB).
The RS1 was introduced by Alco in March of 1941 with the delivery of the first of two units to the Rock Island. Combining the accessibility of a switching locomotive and the higher-speed tracking of a road unit, the RS-1 started a revolution in locomotive design that was soon embraced by all of the major diesel-electric builders. Despite Alco's own introduction of higher horsepower roadswitchers, the 1,000h.p. RS1 had a production span of 19 years (1941-1960) with 623 units.
This Atlas model features a five-pole, skew-wound motor with dual flywheels, directional LED lighting, Accumate(R) magnetic knuckle couplers, accurate decoration and roadname-appropriate body details.
LocoFi'ed Series introduces the most popular and well-known locomotives and trains to modelers, now equipped with LocoFi™ modules to enable it to run on DC, DCC or deadrail layouts, with no additional wiring or equipment installation required. All you need is an Android / Amazon Fire device - cellphone or tablet (no Internet required) with LocoFi™ app installed, available for FREE on Google Playstore / Amazon Appstore. If you are new to LocoFi™, and would like to see if it is for you, then LocoFi'ed Series offers the perfect chance to try it out.
This is a one time opportunity to own a customized LocoFi'ed Atlas Classic Silver HO 10002997 Santa Fe #2395 Alco RS1 Diesel Locomotive equipped with LocoFi 3 (DULLHB). Pre-installed LocoFi'ed Series are rare and limited in number, hand soldered with care and attention to detail, with highest level of craftsmanship and technique, in the USA.
The LocoFi module is pre-installed. Simply install the app, connect and run!
Please reach out if you have any questions.
Technical Specifications
- Input Power Type: Clean (NOT pulsed) DC, DCC or battery - Yes, an old laptop adapter laying around is ideal
- Input Voltage: 7V - 24V - Wide input voltage range
- Current Rating: 1.5A (1A motor) - High amperage decoder
- Motor Operating Voltage: Same as input voltage
- WiFi Spectrum: b/g/n (2.4 GHz)
- Smart Devices Supported: Android
- Speaker with custom tuned enclosure included
- Sound Scheme: Diesel; 8-bit 16kHz; .WAV; 3 channel polyphonic; stored on pluggable microSD to easily load custom sounds
- Supported Sounds: Engine Startup, Idle, Shutdown, Horn and Bell
- Lights: Front and Rear, LEDs, On / Off, 10mA max on each output; resistors onboard
- Other: Onboard capacitor for typical dirty track issues
- Supported OS: Android 5.0+, Fire 5+